Aspire Breeze 2 Starter Kit
Presented with a similarly compact and pocket-friendly design as the original Aspire Breeze Starter Kit, is the Aspire Breeze 2 All-In-One Starter Kit. This upgraded version of its predecessor has a much higher battery capacity of 1000mAh and a new and improved filling method for the enlarged 3mL e-juice reservoir. The Aspire Breeze 2 consists of Aluminum Alloy and PCTG construction with dimensions of 96mm x 25mm x 19mm. While this device can be conveniently draw activated, mounted directly in the center of the ergonomic chassis is an oversized firing button that offers a faster firing time. Also along the chassis are several battery ventilation holes and a Micro-USB port available for recharging the built-in 1000mAh battery and upgrading firmware. The powerful integrated battery offers a direct voltage-based output that simplifies your vaping experience, making it the perfect device for beginners. Another set of buttons, one on each side of the chassis, can be squeezed in order to conveniently and safely remove the installed pod system. This pod system consists of an environmentally friendly drip tip and a tank capable of holding up to 3mL of vape juice. To keep your drip tip free of debris such as pocket lint or grit, Aspire has included a protective cap that is easily popped off/on. In order to replace your coil or fill your tank, simply remove the pod from the rest of the device. Filling the pod is now easier than the original by lifting a tight fitting Silicone seal on the underside and squeezing e-liquid from a dropper bottle into the reservoir. For your convenience, you can see how much e-liquid remains through the visual e-juice viewing window. The Aspire Breeze 2 comes with a pre-installed 1.0 ohm U-Tech coil and a spare 0.6 ohm U-Tech coil, both of which are designed specifically for nicotine salt based e-liquids. By removing the mouthpiece, you will expose a knurled airflow ring with a small range of settings that can drastically change your vaping experience. To switch out the coil, unscrew and pull out the chimney section then unscrew the coil from the airflow control ring. To further assist with airflow, there are five airflow vents on the drip tip itself. Once you’ve got your tank filled and your fresh coil installed, simply pop the pod system back into place and vape away. For a magnificent Mouth to Lung draw with high nicotine levels, the Aspire Breeze 2 All-In-One Starter Kit was crafted to deliver.
- 1 x Aspire Breeze 2 AIO Device
- 1 x 1.0 ohm Breeze 2 U-Tech Vape Coil
- 1 x 0.6 ohm Breeze 2 U-Tech Vape Coil
- 1 x Micro USB Cable
- 1 x User Manual
- Spare Parts